MA Lighting grandMA2 User Manual - page 1371
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
51. Shut Down the System
Important:
Once you have finished your show, make sure to adequately shut down the system.
grandMA2 and grandMA2 onPC
1. Press the power key on the right of the monitor wing or the gray cross in the upper right corner of the
grandMA2 onPC.
2. A warning pop-up appears.
Shut down the system
3. If you forgot to save the show, tap
Save Showfile
. The console or the onPC then saves the show file and
powers down.
To cancel the shut down, tap
Cancel
.
To proceed the shut down without saving the show, tap
Do not Save
.
Important:
-If the onPC is set to
MultiScreen
, the window
Command
is the main window that closes the
application.
-In
SingleScreen
, all views are displayed in the main window, hence, every window closes the
application.
-In
SingleScreen (internal only)
, all windows, except for
Extern 1
and
Extern 2
, close the application.
Please note that whenever changing the mode, a restart is required.
4. The console is successfully powered down.
5. Turn off the power switch on the rear panel and disconnect the plug.
For more information on the location of power key and the power switch see
.
MA VPU (Video Processing Unit) plus
1. To power down the MA VPU plus, tap
Shutdown
on the touch screen of the device.
1371