MA Lighting grandMA2 User Manual - page 850
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
The actual prepositioning of each attribute will not necessarily take place in the cue indicated by the MIB value.
"when possible" means that for each attribute, the prepositioning will be put "on hold" if any of the scenarios below
is present.
Dimmer-output is above zero
Dimmer has a value above zero in any of the cues between the current cue and the cue to prepare for
The attribute is included in any of the cues between the current cue and the cue to prepare for
19.13. Sequence mini executor
When a sequence is assigned to an executor, the mini executor view is displaying relevant information.
It could look like this:
Mini Executor - Sequences
The image above shows three fader executors with assigned sequences and one button executor with an assigned
sequence.
The yellow colored frame identifies that the executor has a sequence assigned.
The mini executor is divided into three section: a top part, a middle part, and a lower part.
Top Part
There are two lines of information in the top part.
The top line has a number on the left side. This number is the
executor
number. If this number has a different
background color, then there is a
applied.
Next to this there might be different letters or symbols. This is list of the different possibilities:
! (exclamation mark):
This symbol means that the executor is currently assigned the "Super" priority.
S:
This symbol means that the executor is currently assigned the "SWP" priority.
H:
This symbol means that the executor is currently assigned the "HTP" priority.
850