MA Lighting grandMA2 User Manual - page 662
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Here you can use what ever method you like to select the color and tap
Please
when you are happy or you could
tap
Reset to White
if you do not want any color.
Pos X, Pos Y, Pos Z:
This the XYZ position of the fixture in the 3D space. Read more about positioning fixtures in the
Rot X, Rot Y, Rot Z:
This the XYZ rotation of the fixture in the 3D space. Read more about positioning fixtures in the
No Parameter:
This is for use with MA VPU (= video processing unit) pixel mapping. If this column is set to "Yes", all the
programming for this fixture
is lost
, it does not consume any parameters any more in the grandMA2 and the MA VPU
will send out the default values defined in the fixture profile additional to the Color RGB 1-3 values.
The idea:
if this
flag has been set (No Parameter), the fixtures can still be selected, but only controlled by the MA VPU, not the
console. Additionally the set default values for this fixture are transmitted. These values can be changed (for example
Dimmer to 100%) in the grandMA2 / Patch & Fixture Schedule / Fixture Types.
RDM ID:
This will display the RDM ID of the fixture when it matched in the
This was all the different columns in the Fixture list.
The DMX Patch pop-up
When you edit one or several patch address in the fixture list, then the DMX Patch pop-up. It could look like this:
662