MA Lighting grandMA2 User Manual - page 853
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
19.14. Commands in cues
Each cue can execute a command. The commands are written in the CMD column in the
The commands are executed as soon as the cue is triggered. It is possible to delay the command by adding a time
in the CMD Delay column.
If you want to run multiple commands in the same cue, you can separate the commands with a semicolon.
As an alternative you could make cue parts and add each command in each part - remember to add a small CMD
Delay, so all commands are not executed at the same time.
The commands are executed by the logged in user on the master station in a session. So be aware that it might not
be the user who triggers the cue that runs the commands.
A useful keyword to know, if you need to trigger a command on a specific station, is the
.
853