MA Lighting grandMA2 User Manual - page 1283
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Important:
Before you start to update your grandMA2 software or doing a factory reset, save your show files and any
other user created data on a USB stick. If you do not save the show files first, the show files can be
deleted or broken and cannot be recoverd anymore.
Requirements:
A Linux formatted USB stick with a software vesion. For more information, see
.
1. Insert the formatted USB stick at a USB port on the grandMA2 console or grandMA2 RPU.
2. To turn the console on, press the power button.
3. When the startup screen appears, have a look the last sentence on the bottom of the screen. This sentence
tells what key you have to press to go to the boot menu. It could be F8, F11, F12, or Esc.
Important:
If the console asks to press F11 or F12 and you have no external keyboard connected, connect an external
keyboard.
Press the key several times until the boot menu appears.
Select boot device
1283