MA Lighting grandMA2 User Manual - page 509
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
9.2.260. SetHostname Keyword
To get the SetHostname keyword in the command line, type
SetHostname
in the command line.
Description
The SetHostname keyword, sets the station name of the console.
Important:
The SetHostname keyword works only on grandMA2 consoles. It is not possible to change the station
name in a grandMA2 onPC. The station name on a grandMA2 onPC is the computer name.To change
the station name on a grandMA2 onPC you need to change the computer name.
The SetHostname keyword is a function keyword.
Syntax
SetHostname "text"
Example
Change the host name to grandMA2.
[Channel]> SetHostname "grandMA2"
9.2.261. SetIP Keyword
To execute keyword SetIP type
SetIP
into the command line.
Description
The SetIP keyword changes the IP address of the Ethernet interfaces of the console or station.
If SetIP is used standalone, the command line feedback window lists the available Ethernet interfaces with their IP
addresses.
A grandMA2 console has two network interfaces,
eth0
and
eth1
, which are on the back of the console labeled as
Ethernet 1
and
Ethernet 2
.
Important:
To apply the changed IP address, a reboot is necessary.
Hint:
Another way to change the IP address of the Ethernet-interfaces of the console or station is, press
Setup
I tap
MA Network Configuration
I column
IP ETHERCON 1(ETH0)
or
IP ETHERCON 2
(ETH1)
. For more information see
Networking - Set the IP address in onPC
509