MA Lighting grandMA2 User Manual - page 583
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
New Show pop-up
In this pop-up it can be chosen what show information from the currently loaded show will be cleared or removed.
In the top it is possible to write the name for the new show.
Pressing the
opens an on-screen keyboard.
Below the name there are different boxes that can be selected. This is the different parts of the show file.
The idea is that when a new show is started there is the option to keep some of the existing data from the currently
loaded show.
Clear Show Data
This is activated as a default. The show data is the patch and fixture schedule, stored sequences, presets, groups,
effects, and so on. Basically everything that is in a pool somewhere and the imported 3D elements.
Clear Time Config
The time configuration is the current time, location, daylight savings settings and NTP (Network Time Protocol)
setup. If this is cleared then the console will reset the location to the default location (The parking lot
outside McFIT Fitnessstudio in Würzburg, Germany) and take the time from the computer Bios.
Clear Global Settings
The global settings are the ones found in Setup -> Console -> Global Settings. The settings here are shared in the
session and includes enabling and disabling the Remote and Telnet, RDM, WYSIWYG, and so on.
Clear Local Settings
The local settings are the ones found in Setup -> Console -> Local Settings. These settings only affects the local
console and not all consoles in a session. It includes settings like the console language and LED background light
settings.
Clear Network Protocols
Network protocols are the settings for outputting DMX via an Ethernet connection. It includes ArtNet, sACN, ETC-Net2,
KiNet1, Pathport and Shownet. These settings are found in Setup -> Network -> Network Protocols.
Clear Network Config
Network configuration is the settings for what devices should be in the session and the DMX port setup.
Clear User Profiles
User profiles keep all the data that is connected to the users. Clearing this data leaves only the Administrator and
Guest users and the Default user profile.
583