MA Lighting grandMA2 User Manual - page 942
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Here we can see where the ten objects (the fixtures) are used.
24.2. Replace
The
Replace
mechanism is used to replace some objects with other objects (or values with other values), using the
, and it might be limited to a defined scope using the
.
The syntax is:
Replace [search for objects/values] ( With [replace with objects/values] ( If [search in objects] ))
Details about the syntax can be read in the
topic. The Replace command can be accessed by
pressing the
Move
key twice.
The replace will search for the objects (could be fixtures, groups, presets, or any object) or values and the search
result will be exchanged with similar objects or values. Just like the regular
, it might be limited to a
certain area in the show (for instance a specific sequence, group, world, or any object).
All this might sound complex but it does not have to be.
Replacing objects
If Fixture 1 needs to be replaced by Fixture 2 in the entire show then type the following:
[Channel]> Replace Fixture 1 With Fixture 2
Doing the replace will open a confirmation pop-up like this:
Confirm Replace pop-up
Tapping the
Ok
button will perform the replace action.
Tapping the
Ok Create Report
button will also perform the replace, but in addition it will create and open a report
showing what the replace action did - it is similar to the search report described in the
942