MA Lighting grandMA2 User Manual - page 539
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
9.2.287. Telnet Keyword
To go to the Telnet keyword, type
Telnet
in the command line or use the shortcut
Tel
.
Description
Important:
The telnet receiver needs to read the commands without a telnet login.
If the telnet receiver asks for a login, the command can not be processed.
The Telnet keyword sends Telnet commands via grandMA2 command line directly to a telnet receiver.
The Telnet keyword is a function keyword.
For more information, see
Syntax
Telnet [IP address] : [Port] "String"
Example
The telnet receiver starts an specific function, if the receiver gets the command "Artist1".
[Channel]> Telnet 192.168.0.1 : 23 "Artist1"
9.2.288. Temp Keyword
To get the Temp keyword in the command line, press
Temp
.
You can also type
Temp
in the command line or use the shortcut
Te
.
Description
The Temp keyword turns an executor on, as long as you hold the executor button.
The Temp keyword follows cue timing, off timing and the position of the master fader from the executor.
If you keep the hands off from the executor button, the executor is off again. The Temp Off keyword will be executed.
The Temp keyword is a function keyword.
Syntax
Temp [Object-list] / [Option] = [Option Value]
Temp On [Object-list] / [Option] = [Option Value]
Temp Off [Object-list] / [Option] = [Option Value]
Options
To get a list of all available options to the Temp keyword, type in the command line:
539