MA Lighting grandMA2 User Manual - page 1369
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
The steps to let all of the consoles in the session synchronize to a NTP server. This has to be done on a station with
a connection to the NTP server:
1. Tap the green field and type in the IP-address of the NTP server
2. Tap
Sync with NTP
, until it shows
Enable
A note in the bottom of the pop-up labeled
NTP server found: Received Time stamp
appears, when there is a
connection to the server.
Hint:
The IP address on the image above is the NTP server on VirginiaTech University, connected by an onPC
with a internet connection.
Daylight info
To get information about Sunrise, Sunset, Dusk and Dawn according to the position or timezone, tap
Daylight Info
.
Daylight info pop-up
These are the times the
Agenda
uses.
GPS
Tap GPS to open the GPS pop-up
Important:
To use the GPS function, an NMEA 0183 (4800/8-N-1) USB GPS receiver has to be connected.
1369