MA Lighting grandMA2 User Manual - page 1083
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
33. Remote Controlling the System
There are several ways to remote control grandMA2.
This section describes them.
There is a
part in the setup that allows simple DMX, Contact Closure and MIDI notes to trigger actions.
A more complex method is to use
. This can be used to trigger cues, macros, control
faders, and turn off executors.
There is a description of the
- a browser interface that allows control and visualization of information -
fixture and cue feedback.
The
connection allows the execution of any command in grandMA2. This can be very useful with 3rd party
controllers - for instance a house control system.
Finally this section also has a very useful
Decimal, Hex, ASCII conversion table
.
33.1. Remote Inputs
The
Remote Input
section can be found by pressing the
Setup
key and then
Remote Input Setup
in the
Show
tab.
There are three tabs:
Analog Remotes
,
MIDI Remotes
, and
DMX Remotes
.
The three tabs are very similar. The only difference is the remote source. A remote tab could look like this:
1083