MA Lighting grandMA2 User Manual - page 491
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Assign an existing remote a DMX address, a remote type and a command.
[Channel]> Assign Remote 3.1 /dmx=5.1 /type=cmd /cmd="Group 1"
9.2.241. RemoteCommand Keyword
To go to the RemoteCommand keyword, type
RemoteCommand
in the command line or use the shortcut
RemoteC
.
Description
The RemoteCommand keyword executes commands at a specific console.
RemoteCommand is a function keyword.
Syntax
RemoteCommand [IP address] "Command"
Examples
Call view 3 at the station with the IP address 192.168.0.4.
[Channel]> RemoteCommand 192.168.0.4 "View 3"
Start macro 4 only on a specific console.
[Channel]> RemoteCommand 192.168.0.4 "Macro 4"
9.2.242. Remove Keyword
491