MA Lighting grandMA2 User Manual - page 728
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Show IDs:
The fixtures ID numbers and names are displayed above the DMX values. They are only displayed once per fixture -
the ID is nor displayed above each DMX value.
DMX values with ID number and name
Show Attributes:
The attribute connected with the DMX address is displayed above the DMX value.
DMX values with attribute name above the values
Show Address:
The DMX address is displayed above each DMX value.
DMX values with DMX addresses above each value
Show Additional can also be a
.
Show Only Selected
Show Only Selected
is an option in the DMX sheets.
This will limit the DMX sheet to only display the universes of the selected fixtures.
Show Only Selected can also be a
Programmer Colors
Programmer Colors
is an option in the DMX sheets.
There are two color schemes for the DMX values in the DMX sheet.
There is the default where the background color changes from gray to light green depending on intensity of the
value.
But you can choose to use turn On Programmer Colors instead. This will then use the same color schema as the
Channel and Fixture Sheets.
Programmer Colors can also be a
Merge Same Values
Merge Same Values
is an option in Fixture, Content, and Tracking sheets.
Some features can combine or merge the values displayed in the sheets if the value is the same. For instance the
MixColor attributes "R", "G", and "B". If these three attributes have the same value then it is only displayed once - as
a merged value. If they have different values then they are split up into each displaying the values they have.
728