MA Lighting grandMA2 User Manual - page 608
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
XKeys always for Exec
- When this is
On
, then the X-Keys (below screen 1) will always work as the Executor
Buttons. It will
not
automatically follow the content on the lower part of screen 1.
3D Items Unit
- This will change the units in the MA 3D (and Stage View). There are two options:
Scale
- The visible number will be a scale of the item size.
Size(m)
- The visible number will be in meters.
CurrentChannelPage
- This is this users current Channel Page.
CurrentFaderPage
- This is this users current Executor Fader Page.
CurrentButtonPage
- This is this users current Executor Button Page.
EncoderLink
- The encoder link is used when working in the Fade, Delay and Effect layers. It has several options:
Single
- Only sets the value for the attribute you change.
Single Active
- Same as above, but limited to parameters that are already active in programmer.
Feature
- Sets the value for all attributes in the selected feature. For example if you set a delay time for 'Pan' it
will also set the time for 'Tilt'.
Feature Active
- Same as above, but limited to parameters that are already active in programmer.
All
- This sets the value for all attributes.
All Active
- Same as above, but limited to parameters that are already active in programmer.
Filter
- Sets the value for the attributes selected in the current filter from the filter pool or at filter.
Filter Active
- Same as above, but limited to parameters that are already active in programmer.
Select Encoder Link pop-up
Programmer Colors
- This setting allows to change between two different set of visual color feedback
regarding the programmer. The two options are
11.4. Login on a station
608