MA Lighting grandMA2 User Manual - page 46
of
1433
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
5.9. Connect Sound
To use a sound trigger, BPM or sound as an effect form, connect a sound source to the console.
Information:
The signal strength should be a minimum of 20 millivolts.
Pin 1: Ground
Pin 2 and Pin 3: Balanced Input
Connect the 3 pin XLR sound source cable to the Audio IN connector on the rear panel.
The sound source is connected to the Audio IN connector.
grandMA2 full-size Audio IN connector
For more information see
and
.
5.10. Connect SMPTE (LTC)
46