NEC Univerge SV8100 Programming Manual - page 102
Issue 11.0
UNIVERGE SV8100
2 - 60
Program 10 : System Configuration Setup
Description
Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP
trunks and assign the number of ports if IP Trunk is enabled.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-40 : IP Trunk Availability
Level:
IN
Input Data
Slot Number
1
Input Data
Item
No.
Item
Input Data
Default
01
IP Trunk
Availability
All IP trunks (SIP,
CCIS, or H.323)
must be contiguous.
If any IP trunks are
added to a system
that already has IP
trunks installed, and
the next set of trunks
is not contiguous,
then all IP trunks are
moved to a new set
of contiguous trunk
numbers.
0 = Disable
1 = Enable
0
02
Number of Ports
0~200
0
04
Number of IP
CCIS Ports
0~200
0