NEC Univerge SV8100 Programming Manual - page 216
Issue 11.0
UNIVERGE SV8100
2 - 174
Program 15 : Extension, Basic Setup
11
Callback Automatic Answer
Enable/Disable automatic answer
of calls recalling to a station. For
example, if a Transfer Recall or
Hold Recall is ringing back to a
station, the following happens:
If PRG 15-02-11 is enabled, the
station automatically answers the
recall when it goes off-hook.
If PRG 15-02-11 is disabled, a
station does not automatically
answer the recall when it goes off-
hook. The user must first press the
line appearance of the recalling call
or press the answer key.
0 = Off
1 = On
1
12
Off-Hook Ringing
Set the telephone Off-Hook
signaling. Off-hook signaling
occurs when a telephone user
receives a second call while busy
on a handset call. To enable/
disable Off-Hook Signaling for an
extension Class of Service, use
Program 20-13-06.
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset Beep
5
13
Redial List Mode
Select whether the Redial List
feature should store internal and
external numbers (0), or only
external numbers (1).
0 = ICM/Trunk (Extension/
Trunk Mode)
1 = Trunk Mode
1
15
Storage of Caller ID for answered
call
0 = Disable (Off)
1 = Enable (On)
1
16
Handsfree Operation
Enable/Disable an extension user
ability to use the speakerphone on
outside calls. When disabled,
users can hear the conversation,
but cannot respond handsfree.
0 = Disable (Off)
1 = Enable (On)
1
18
Power-Saving Mode
0 = Normal mode
1 = Power-Saving Mode
(Eco-Mode)
1
20-02-10
19
CTA Data Communication Mode
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
connection (1=on, 2~8=off) or
select 1 if the DIP switches are set
to printer connection (1~2=on,
3~8=off).
0 = CTI Mode
1 = Non Procedural Mode
(Non-SCS)
0
15-02-20
Item
No.
Item
Input Data
Default
Related
Program