NEC Univerge SV8100 Programming Manual - page 624
Issue 11.0
UNIVERGE SV8100
2 - 582
Program 47 : In-Mail
01
(continued from previous page)
3. Date
A type 3 Answer Schedule runs only on a
specific day of the year. For this type of
schedule, you select:
The specific date the schedule should
run.
On the selected date, the time the
schedule should start.
On the selected date, the time the
schedule should stop.
The Call Routing or Announcement
Mailbox used to answer the calls.
0 = Undefined
1 = Day of the Week
2 = Range of Days
3 = Date
Answer Table 1/
Schedule 1 = 2
All Other
Schedules = 0
02
Answering Mailbox Category
(Entryxx MB Ctg)
Specify the category of mailbox to which
Automated Attendant calls should route when
the schedule is in effect. SV8100 InMail mailbox
categories are Subscriber Mailbox, Master
Mailbox, or Routing Mailbox.
SV8100 InMail handles the routing according to
the exact type of Subscriber, Master, or Routing
Mailbox specified.
If the Answering Mailbox is a Subscriber
Mailbox, the outside caller hears the mailbox
greeting (if recorded) and can leave a message.
If the Answering Mailbox is an Announcement
Mailbox, the outside caller hears the recorded
announcement. Depending on how the
Announcement Mailbox is programmed,
SV8100 InMail then hangs up, reroutes the call,
or provides additional dialing options.
If the Answering Mailbox is a Call Routing
Mailbox, the outside caller hears the instruction
menu and can dial any option allowed by the
associated Dial Action Table.
0 = Undefined
1 = Subscriber Mailbox -
STA
2 = Group Mailbox
3 = Routing Mailbox
3
Answering Mailbox Number
(Entryxx MB Num)
Set the number of the Answering Mailbox the
Automated Attendant uses when the selected
schedule is in effect. This mailbox is defined in
47-12-02: Answering Mailbox Category.
Digits (three maximum,
using 0~9)
Answer Table 1/
Schedule 1 = 1
All Other
Answer
Schedules = No
Entry
03
Day of the Week
(Entryxx Day)
For Day of the Week (Type 1) Answer
Schedules, select the day of the week the
Answer Schedule should be active.
1 = Sunday
2 = Monday
3 = Tuesday
4 = Wednesday
5 = Thursday
6 = Friday
7 = Saturday
1
Input Data (Continued)
Item
No.
Item
Input Data
Default