NEC Univerge SV8100 Programming Manual - page 108
Issue 11.0
UNIVERGE SV8100
2 - 66
Program 10 : System Configuration Setup
Description
Use Program 10-46 : DT700 Server Information Setup to setup the information of
SIP Multiline (DT700 series) Server.
Program 10 : System Configuration Setup
10-46 : DT700 Server Information Setup
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
Related
Program
01
Register Mode
Normal:
When the phone boots up,
it reports the ext. assigned
in the phone or chooses the
next available extension in
the system. Password is
not required.
Auto:
If set to Auto, the SIP user
name and password must
be entered on the actual IP
phone. These settings
must match 84-22/15-05-
27, or the phone does not
come on-line.
Manual:
When the phone boots up,
it prompts user to enter a
user ID and password
before logging in. If the
user name and password
are programmed in the SIP
User settings in the
telephone, it comes up
without prompting the user.
It checks this user ID/
password against 84-22/
15-05-27. If there is no
match, the phone does not
come on-line.
0 = Normal
1 = Auto
2 = Manual
0
04
Server Name
Assign the Server name to
be used in the SIP URL.
Up to 32 characters
sipphd