NEC Univerge SV8100 Programming Manual - page 581
SV8100 Programming Manual
2 - 539
Program
45
Description
Use
Program 45-01 : Voice Mail Integration Options
to customize certain voice
mail integration options.
Program 45 : Voice Mail Integration
45-01 : Voice Mail Integration Options
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Voice Mail Department Group Number
Assign Extension (Department) Group number
as the voice mail group.
0~64
0 = No Voice Mail
0
02
Voice Mail Master Name
Enter the Voice Mail Master Name.
Up to 12 Characters
VOICE
03
Voice Mail Call Screening
Enable/Disable the ability to process the Call
Screening commands (1+ extension number)
sent from the Voice Mail. You should normally
enable this option to allow for Voice Mail Call
Screening. Disable this option if your system
has been modified so that extensions begin
with the digit 1 (e.g., 101, 102, etc.).
0 = Off
1 = On
0
04
Park and Page
Enable/Disable the system ability to process
the Voice Mail Park and Page () commands.
You should normally enable this option.
0 = Off
1 = On
1
05
Message Wait
Enable/Disable the system ability to process
the Voice Mail Message Wait (
#
) commands.
You should normally enable this option. If
enabled, be sure that the programmed
Message Notification strings don’t contain the
code for trunk access.
0 = Off
1 = On
1
06
Record Alert Tone Interval Time
Set the time between Voice Mail Conversation
Record alerts.
0~64800 (sec)
30