NEC Univerge SV8100 Programming Manual - page 830
Issue 11.0
UNIVERGE SV8100
2 - 788
Program 84 : Hardware Setup for VoIP
Conditions
None
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
36
G.726 Jitter Buffer (max)
0~255ms (Note 2)
120
37
--- Not Used ---
38
iLBC Voice Activity Detection Mode
Not used by IPLB.
0 = Disabled
1 = Enabled
0
39
iLBC Jitter Buffer (min)
0~255ms (Note 2)
30
40
iLBC Jitter Buffer (average)
0~255ms (Note 2)
60
41
iLBC Jitter Buffer (max)
0~255ms (Note 2)
120
42
FAX Relay Mode
0 = Disable
1 = Enable
2 = Each Port Mode (each
extension)
0
43
RTP Filter
To avoid incorrect voice pass connection, this
Program checks the sending side address from
received RTP packet at VoIPDB.
0 = Disable
1 = Enable
1
44
DTMF Level Mode
Used only by IPLB.
0 = VoIPU default value
1 = Main soft value
0
45
DTMF Level High
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
28
46
DTMF Level Low
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
28
47
FAX over IP Type
Type 1: SV8100 original mode.
Type 2: PBX compatible mode.
0 = Type 1
1 = Type 2
0
Input Data (Continued)
Item
No.
Item
Input Data
Default