NEC Univerge SV8100 Programming Manual - page 845
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 803
09
DTMF Pause
Used only by IPLB. Effective when
84-27-01 = 1 (In Band).
0: follow RFC2833
25~2000(ms)
0
10
DTMF Positive Twist Level
Used only by IPLB.
0~24(dB)
5
11
DTMF Negative Twist Level
Used only by IPLB.
0~24(dB)
0
12
DTMF Duration (Out of Band)
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
30~2000(ms)
100
13
DTMF Level
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
1~61 (-36dB ~ +24dB)
1: -36dB
2: -35dB
:
37: 0dB
:
60: 23dB
61: 24dB
25 (-12db)
14
ICMP Redirect
Used only by IPLB.
0 = Enable
1 = Disable
0 = Voice Packets WILL follow
ICMP redirect messages.
1 = Voice Packets WILL NOT
follow ICMP redirect
messages.
for Signaling packets and
ICMP refer to PRG 10-12-08.
1
15
DTMF Detect Minimum Duration
Used only by IPLB.
This setting is the minimal time setting to
distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
23~2000(ms)
30
16
DTMF Detect Minimum Level
Used only by IPLB.
This setting is the minimal level setting
to distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
0: -40dbm
1: -39dbm
2: -38dbm
:
31: -9dbm
2 (-38dbm)
Input Data (Continued)
Item
No.
Item
Input Data
Default