NEC Univerge SV8100 Programming Manual - page 942
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Programming Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
966
Issue 11.0
UNIVERGE SV8100
2 - 900
Program 90 : Maintenance Program
Description
Use Program 90-69 : Outbound IP Connection Setup to set the outbound IP
connection information.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-69 : Outbound IP Connection Setup
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Port Number
Assign the port number used
for Outbound IP Connection
programming.
1~65535
8000
02
IP Address
Assign the IP Address that
the system will use for TCP
establishment request to I.E.
the IP address of the PC with
the waiting PC Programming.
0.0.0.0~255.255.255.255
0.0.0.0
03
Caller ID
Assign Caller ID number of
the system to compare with
the received Caller ID.
Maximum of 16 digits
(0~9, *, #)
None