NEC Univerge SV8100 Programming Manual - 35-02 : Smdr Output Options
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 459
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message
Detail Recording) output options for each of the eight SMDR ports. Refer to the
following chart for a description of each option, its range and default setting.
Program 35 : SMDR Account Code Setup
35-02 : SMDR Output Options
Level:
IN
Input Data
SMDR Port Number
1~8
Item
No.
Item
Input Data
Default
01
Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
0 = Not Displayed
1 = Displayed
1
02
PBX Calls
When the system is behind a PBX, SMDR can
include all calls (1), or just calls dialed using the
PBX trunk access code (0).
0 = Not Displayed
1 = Displayed
1
03
Trunk Number or Name
Select whether the system should display the
trunk number or the name on SMDR reports.
If this option is set to 1, Program 35-02-14
must be set to 0.
0 = Name
1 = Number
1
04
Summary (Daily)
Set to 1 to have the SMDR report provide a
daily summary (at midnight every night).
0 = Not Displayed
1 = Displayed
1
05
Summary (Weekly)
Set to 1 to have the SMDR report provide a
weekly summary (every Saturday at midnight).
0 = Not Displayed
1 = Displayed
1
06
Summary (Monthly)
Set to 1 to have the SMDR report provide a
monthly summary (at midnight on the last day
of the month).
0 = Not Displayed
1 = Displayed
1
07
Toll Charge Cost
Set to 1 to have the SMDR report include toll
charges.
0 = Not Displayed
1 = Displayed
1