NEC Univerge SV8100 Programming Manual - Program 51 : Netlink Service
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 637
Description
Use Program 51-03 : NetLink Internet Protocol Address List Setting to set the IP
address of the NetLink system.
Conditions
When there is no Primary System yet, or Fail Over occurs, Node List is referred to
establish new link.
This setting is necessary when PRG 51-01-03 is 0, or PRG 51-05-02 is other than
0. Once the system connects to the Primary System, this setting is updated by the
Primary system when PRG 51-13-01 is on. So, enter IP address of the systems
that may become Primary at least.
Feature Cross Reference
None
Program 51 : NetLink Service
51-03 : NetLink Internet Protocol Address List Setting
Level:
IN
Input Data
List ID
1~50
Item
No.
Item
Input Data
Default
01
Internet Protocol Address List
The system seeks the Primary system based on
this list.
When there is no Primary system yet, or
Fail-Over occurs, Node List is referred to
establish new link. This setting is necessary
when PRG 51-01-03 is 0, or PRG 51-05-02 is
other than 0.
Once the system connects to the Primary
System, this setting is updated by the Primary
system when PRG 51-13-01 is On. So, enter IP
address of the systems that may become
Primary at least.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0