NEC Univerge SV8100 Programming Manual - page 831
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 789
Description
Use Program 84-22 : DT700 Multiline Logon Information Setup
to set the DT700
Multiline logon information.
Program 84 : Hardware Setup for VoIP
84-22 : DT700 Multiline Logon Information Setup
Level:
IN
Input Data
Personal ID Index
1~512
Input Data
Item
No.
Item
Input Data
Default
01
User ID
Input the User ID when using manual or auto
registration (10-46-01).
Up to 32 characters
No Setting
02
Password
Input the Password when using manual or
auto registration (10-46-01).
IP Multiline terminals only support
numerical user IDs, not alphanumeric.
Up to 16 characters
No Setting
03
User ID Omission
Input the Personal ID from terminal
automatically when log on again.
0 = Off
1 = On
0
04
Log Off
When the registration mode (10-46-01) is set
to manual, and the phone prompts for a login,
the previous user ID appears so the user only
has to enter the password.
When enabled, the extension assigned to the
Personal ID Index can be logged off or
overridden by another IP multiline station or
Softphone.
In Manual mode, a user can also log off the
IP phone to allow another user to login with
their own login ID and password. To logoff
the IP phone use the following operation:
Press the "Down Arrow" Soft Key, press the
"Prog" soft key, and then press the
"LOGOFF" soft key.
0 = Off
1 = On
1