NEC Univerge SV8100 Programming Manual - page 567
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 525
Conditions
None
Feature Cross Reference
Automatic Route Selection (ARS)
03
Additional Data
For the Service Type selected in 44-02-02, enter
the additional data required.
1: Delete Digit = 0~255
(255 = Delete All Digits)
2: [Program 44-01 : 0]
ARS/F-Route Table Number = 0~500
(0 = No Setting)
Refer to Program 44-05.
[Program 44-01 : 1]
ARS/F-Route Select Table Number = 0~500
(0 = No Setting)
Refer to Program 44-04.
3: Dial Extension Analyze Table Number =
0~4 (0 = No Setting)
Refer to Program 44-03.
1 = Delete Digit = 0~255 (255
: Delete All Digits)
2 = 0~500
(0 = No Setting)
3 = Dial Extension Analyze
Table Number = 0~4
(0 = No Setting)
0
04
Dial Tone Simulation
Enable to send dial tone to the calling party after
the routing is determined. This may be required if
the central office at the destination does not send
dial tone.
0 = Off
1 = On
0
Item
No.
Item
Input Data
Default