NEC Univerge SV8100 Programming Manual - Program 31 : Paging Setup
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 433
Description
Use Program 31-06 : External Speaker Control to define the settings for the
external speaker using an amplifier.
Program 31 : Paging Setup
31-06 : External Speaker Control
Level:
IN
Input Data
External Speaker Number
1~9
Item
No.
Item
Input Data
Default
01
Broadcast Splash Tone Before
Paging (Paging Start Tone)
Enable/Disable splash tone before
Paging over an external zone. If
enabled, the system broadcasts a
splash tone before the External
Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
02
Broadcast Splash Tone After
Paging (Paging End Time)
Enable/Disable splash tone after
Paging over an external zone. If
enabled, the system broadcasts a
splash tone at the end of an
External Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
03
Speech Path
Determine if the external speaker
is used for talkback (As this option
is not available with the
CD-CP00-US external page zone,
speaker 9 should be left at 1).
0 = Both Way (Duplex)
1 = One Way (PGD(2)-U10 ADP
SPK) (Simplex)
1
04
CODEC Transmit Gain Setup
1~63 (-15.5 ~ +15.5dB)
32
05
CODEC Receive Gain Setup
1~63 (-15.5 ~ +15.5dB)
32