NEC Univerge SV8100 Programming Manual - page 858
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Programming Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
966
Issue 11.0
UNIVERGE SV8100
2 - 816
Program 84 : Hardware Setup for VoIP
Conditions
None
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
35
RTP RX Level Control Level
Normally not used. Select receive
voice level. Effective when
84-31-34 = 1
0~16 (-24 ~ +24)
0 = -24dB
1 = -21dB
:
8 = 0dB
:
15 = 21dB
16 = 24dB
8
36
RTP RX Automatic Level Control
Level
Normally not used. Select target
gain. Effective when 84-31-34 = 2
0~12 (-42 ~ -6)
0 = -42dBm
1 = -39dBm
:
7 = -21dBm
:
11 = -9dBm
12 = -6dBm
7
37
TDM Echo Canceller NLP Mode
(4W)
Select Echo Compression Mode
for remaining echo. Effective when
84-31-19 = 1
0 = Disable
1 = Enable
2 = Long Echo Path Mode
3 = Long Echo Path Auto Detect
Mode
1
Input Data (Continued)
Item
No.
Item
Input Data
Default