NEC Univerge SV8100 Programming Manual - Program 51 : Netlink Service
Issue 11.0
UNIVERGE SV8100
2 - 644
Program 51 : NetLink Service
Description
Use Program 51-09 : NetLink Communication Port Settings to set the various
communication ports used on the system.
Program 51 : NetLink Service
51-09 : NetLink Communication Port Settings
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Primary Waiting Port
Set the communication port that the Primary
system uses to communicate with the
Secondary system.
0~65535
58000
02
Communication Waiting Port
Select port used to communicate between
nodes. It is always opened by all nodes.
0~65535
58001
03
Secondary Communication Port
Secondary system communicates with Primary
system at this port number. If 0 is specified,
temporary port is dynamically selected.
0~65535
0
04
Primary Search Port
When Fail-Over occurs, each system
communicates with other system at this port
number.
If 0 is set, temporary port is dynamically
selected.
If 0 is not specified, the number and continuous
maximum 50 number is used.
(Ex. 5000 is specified 5001, 5002…5049 are
used).
0~65535
0
05
Primary Detection Port
Enter port number to seek the Top Priority
Primary system.
If 0 is specified, temporary port is dynamically
selected.
0~65535
0
06
Database Replication Communication
Listening Port
Use this port to replicate database.
0~65535
58002