NEC Univerge SV8100 Programming Manual - page 146
Issue 11.0
UNIVERGE SV8100
2 - 104
Program 11 : System Numbering
Description
Use
Program 11-10 : Service Code Setup (for System Administrator)
to customize the
Service Codes for the System Administrator. You can customize additional Service
Codes in Programs 11-11~11-16. The following chart shows:
The number of each code (01~42).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing Item 26 allows users to force a trunk line to
disconnect.
Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
Level:
IN
Input Data
Item
No.
Item
Terminals
Default
Related
Program
01
Night Mode Switching
MLT, SLT
718
12-xx
20-07-01
02
--- Not Used ---
03
Setting the System Time
MLT
728
04
Storing Common Speed Dialing
Numbers
MLT
753
05
Storing Group Speed Dialing
Numbers
MLT
754
06
Setting the Automatic Transfer for
Each Trunk Line
MLT
733
24-04-01
07
Canceling the Automatic Transfer
for Each Trunk Line
MLT
734
24-04-01
08
Setting the Destination for
Automatic Trunk Transfer
MLT
735
24-04-01
09
Charging Cost Display by the
Supervisor
MLT
Not Set
10
--- Not Used ---
11
Entry Credit for Toll Restriction
MLT
Not Set