NEC Univerge SV8100 Programming Manual - page 621
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 579
03
Default Mailbox Category
(Default MB Ctg)
Specify the category of mailbox used as the Default
Mailbox. SV8100 InMail mailbox categories are
Subscriber Mailbox, Master Mailbox, and Routing
Mailbox. SV8100 InMail uses the Default Mailbox
when an Answer Schedule is not in effect.
SV8100 InMail handles the routing according to the
type of mailbox (Subscriber, Call Routing, or
Announcement) within the specified category:
If the Default Mailbox is a Subscriber Mailbox,
the outside caller hears the mailbox greeting (if
recorded) and can leave a message.
If the Default Mailbox is an Announcement
Mailbox, the outside caller hears the recorded
announcement. Depending on how the
Announcement Mailbox is programmed,
SV8100 InMail then hangs up, reroutes the call,
or provides additional dialing options.
If the Default Mailbox is a Call Routing Mailbox,
the outside caller hears the instruction menu
and can dial any option allowed by the
associated Dial Action Table.
If any of the Input Data values are entered, the
terminal displays the Override Mailbox
Number selection (below).
0 = Undefined)
1 = Subscriber
Mailbox (STA)
2 = Group Mailbox
3 = Routing
Mailbox
Answer Table 1 = 3
Answer Table 2~8
= 0
Default Mailbox Number
(Default MB Num)
Set the Answer Table Default Mailbox number.
SV8100 InMail uses the Default Mailbox when an
Answer Schedule is not in effect. By default, this
occurs at all times other than Monday through
Friday from 8:30 AM to 5:00 PM.
Digits (Three
maximum, using
0~9)
Answer Table 1 = 1
Answer Table
2~8 = No Entry
04
Next Answer Table
When 10 Answer Schedules in an Answer Table are
not sufficient, link two Answer Tables together.
SV8100 InMail treats the two linked tables as a
single 20 entry Answer Table.
Answer Table
(1~16)
0 = Undefined
0
Input Data (Continued)
Item
No.
Item
Input Data
Default