NEC Univerge SV8100 Programming Manual - page 205
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 163
Description
Use Program 14-09 : Conversation Recording Destination for Trunks to set the
ACI Conversation Recording destination for each trunk.
If both Programs 14-09 and 15-12 define a destination, the destination in Program
15-12 is followed.
Conditions
None
Feature Cross Reference
Analog Communications Interface (ACI)
Program 14 : Trunk, Basic Setup
14-09 : Conversation Recording Destination for Trunks
Level:
IN
Input Data
Trunk Port Number
001~200
Item
No.
Item
Input Data
Default
01
ACI Recording Destination Extension Number
Enter the ACI extension number where the trunk calls
should be recorded.
Maximum eight digits
No Setting
02
ACI Automatic Recording for Incoming Calls
Determine if incoming trunk calls should be
automatically recorded in the ACI.
0 = Off
1 = On
0