NEC Univerge SV8100 Programming Manual - page 231
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 189
Conditions
15-05-04 – Nickname must be unique in the system.
Feature Cross Reference
None
48
Subscribe
Expire Timer
for NAPT
0 = Disable
60 ~ 65535(sec)
180
On a per station basis, this
setting defines the SIP
Subscribe expiry timer. This
setting only applies to
DT700 stations connected
via NAPT. If this value is set
to 0, for a NAPT terminal,
the value in PRG 84-23-02 is
applied.
Note: Version 9000 or higher
is required.
10-46-14
49
Receiving SIP
INFO
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is
not available
1
Select whether or not
system can receive DTMF
from standard SIP phone via
SIP INFO message. There
are two receive types.
1=’Allowed any time' can
receive a SIP INFO
message from a standard
SIP phone as a dial
information any time.
'2=Allowed while RTP is not
available' can receive a SIP
INFO message before
establishing RTP
connection.
Item
No.
Item
Input Data
Default
Description
Related
Program