NEC Univerge SV8100 Programming Manual - page 110
Issue 11.0
UNIVERGE SV8100
2 - 68
Program 10 : System Configuration Setup
12
Multicast Port
The port number that is
used for paging will change
based upon the following
information.
The formula for the ports
that will be used is:
Starting port number
assigned in 10-46-12 +
Management ID * 2
The value of the
Management ID is from 1 to
64. The Management ID
will count up sequentially,
for example:
10-46-12 = 3000
The first page the system
makes will use port 30002
(3000 + 1*2).
The second page the
system makes will use port
30004 (3000 + 2*2).
The Management ID will
increment every time the
page is used. After the
Management ID reaches
64 it will start over, so the
next page will use
Management ID 1.
The max. port starting from
3000 would be 30128
(3000 +64*2)
0~65535
30000
13
Subscribe Session Port
When using NetLink
(Program 51-01-01) this
Program is not used and
Program 51-17-02 will be
used per each System ID.
0~65535
5081
14
NAT Mode
When the system controls
the SIP multiline terminal
via the NAT router, this
system data is set to On.
0 = Off
1 = On
0
Input Data (Continued)
Item
No.
Item
Input Data
Default
Related
Program