NEC Univerge SV8100 Programming Manual - 85-04 : Port Mirroring Setup
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Programming Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
966
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 825
Description
Use Program 85-04 : Port Mirroring Setup
to define the port mirroring for each
HUB(8) blade. This permits traffic from one port to be simultaneously transmitted to a
second port. Port mirroring is typically used for debugging with a protocol analyzer.
(Version 2500 or higher required)
Conditions
Set to the port where the protocol analyzer is connected.
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
Program 85 : HUB(8) LAN Setup
85-04 : Port Mirroring Setup
Level:
IN
Input Data
Hub Slot
1~24
Item
No.
Item
Input Data
Default
Description
01
Port Mirroring
0 = Disable
1 = Enable
0
02
Source Port
1~8
1
Set to the port to be monitored.
03
Target Port
1~8
1
Set to the port where the protocol analyzer
is connected.