NEC Univerge SV8100 Programming Manual - 15-13 : Loop Key Data
Issue 11.0
UNIVERGE SV8100
2 - 208
Program 15 : Extension, Basic Setup
Description
Use Program 15-13 : Loop Key Data to set the Loop Key Data for each terminal.
Loop Keys can be Incoming, Outgoing, or both ways. Outgoing Loop Keys use the
entry in Item 01. Incoming Loop Keys use the entry in Item 02. Both Way Loop Keys
follow the entries in both Items 01 and 02.
(Requires software Version 4000 or higher)
Conditions
None
Feature Cross Reference
Loop Key
Program 15 : Extension, Basic Setup
15-13 : Loop Key Data
Level:
IN
Input Data
Extension Number
Maximum eight digits
Key Number
01~48
Item
Number
Item
Input Data
Default
01
Outgoing Option
0~8 or 0~100
(0 = Assigns the Loop Key for
ARS, 1~100 = Assigns the Loop
Key to the trunk group specified.)
Programmable Function
Key Number 01~32:
Outgoing Option - 0
(Assigns the Loop Key for
ARS)
Incoming Option - 0
(Assigns the Loop Key to
all trunk groups)
02
Incoming Option
0~8 or 0~100
(0 = Assigns the Loop Key to all
trunk groups, 1~100 = Assigns
the Loop Key to the trunk group
specified.)