NEC Univerge SV8100 Programming Manual - page 255
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 213
Conditions
If a trunk call rings a Virtual Extension, the Virtual Extension Key Operation Mode
must be set to 1 (Land on the key), or the multiline terminal must have a CAP Key
or CO Line Appearance.
Feature Cross Reference
None
04
Show Internal Caller Information
When set to a 0, internal calls to the virtual
extension will not show the name or
number of the extension that is calling.
When set to 1, internal calls to the virtual
extension WILL show the name or number
of the extension that is calling if the virtual
is assigned to ring or if PRG 15-18-03 is
set to a 1.
0 = Do not show
1 = Show
0
15-09-01
15-18-03
05
One Ring
When set to a 0, the virtual extension
follows the normal ring cycle.
When set to a 1, the virtual extension will
only ring one time (the virtual extension
must be first set to ring in PRG 15-08).
0 = Normal Ring
Cycle
1 = One Ring
0
15-09-01
Item
No.
Item
Input Data
Default
Related
Program