NEC Univerge SV8100 Programming Manual - page 266
Issue 11.0
UNIVERGE SV8100
2 - 224
Program 16 : Department Group Setup
04
Hunting Mode
Set the action taken when a call
reaches the last extension in the
Department Group (0 = hunting
stopped, 1 = hunting repeats
with circular routing through the
Department Group).
0 = Last extension is
called and hunting is
stopped
1 = Circular
0
05
Extension Group All Ring
Mode Operation
Determine whether calls ringing
a Department Group should ring
all extensions in the group
simultaneously automatically or
manually when using the
service code defined in Program
11-12-09.
When set to (1)
Automatic, only ICM
Calls and DID Calls will
ring all the stations in the
Department Group.
0 = Manual
1 = Automatic
0
11-16-10
06
STG Withdraw Mode
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
0
07
Call Recall Restriction for
STG
Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
0
08
--- Not Used ---
09
Department Hunting No
Answer Time
Set the time a call rings a
Department group extension
before hunting occurs.
0~64800 seconds
15
10
Enhanced Hunt Type
Set the type of hunting for each
Extension (Department) Group.
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy
or No Answer
0
Item
No.
Item
Input Data
Default
Related
Program