NEC Univerge SV8100 Programming Manual - Program 34 : Tie Line Setup
Issue 11.0
UNIVERGE SV8100
2 - 452
Program 34 : Tie Line Setup
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
Level:
IN
Input Data
Class of Service
01~15
Item
No.
Name
Input Data
Default
Related
Program
COS 2~15
01
Receive Format
Specify the format of the ANI/DNIS data
received from the telco. Make sure your entry
is compatible with the service the telco
provides. The character indicates a
delimiter.
If PRG34-01-02 is selected to 2 (MF), this
PRG works only as 4 =*ANI*DNIS*.
0 = Address
1 =
ANI
2 =
DNIS
3 =
ANI
Address
4 =
ANI
DNIS
5 =
DNIS
ANI
(
= Delimiter Code)
0
34-01-02
34-09-02
02
Delimiter Dial Code
Define the character Telco uses as a delimiter
(see entries 1~5 in Item 1 above). Valid entries
are 0~9,
#
, and .
1~9, 0,
#
,
34-09-01
03
Route Setup of Receive Dial
Specify the source of the data the system
uses to route incoming ANI/DNIS calls. If
option 2 is selected, refer to Program 34-09-
04.
0 = Fixed Route (Item
08) (No Routing)
1 = Routes on Received
DNIS or Address
Data
2 = Routes on Received
ANI Data
0
22-09-01
22-11-01
34-09-04
34-09-08