NEC Univerge SV8100 Programming Manual - Program 51 : Netlink Service
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 643
Description
Use Program 51-08 : Primary NetLink Setting to set the IP address and system ID
of the compulsory specification of the Primary system.
(This program is available only via telephone programming and not through PC
Programming).
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-08 : Primary NetLink Setting
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
IP Address of New Primary System
Enter target IP address for New Primary system.
When the Forced Change Primary system is
done, this setting is erased.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02
System ID of New Primary System
When set to 0, top priority Primary system is
assumed to be the new Primary system.
0~50
No
setting