NEC Univerge SV8100 Programming Manual - page 420
Issue 11.0
UNIVERGE SV8100
2 - 378
Program 24 : Hold/Transfer Setup
Description
For each extension/virtual extension port, use Program 24-06 : Fixed Call
Forwarding to assign the Fixed Call Forwarding Type (0~4) and the destination
extension/virtual extension. For extension ports, the Fixed Call Forwarding
destination can be an on- or off-premise extension or a Voice Mail extension. For
virtual extensions, the Fixed Call Forwarding destination can be an on-premise
extension or Voice Mail extension.
Conditions
Do not use Fixed Call Forwarding Type 1 (Both Ringing) with Voice Mail ports.
Feature Cross Reference
Call Forwarding
Program 24 : Hold/Transfer Setup
24-06 : Fixed Call Forwarding
Level:
IN
Input Data
Extension Number
Up to eight digits
Fixed Call Forwarding Type
Default
Description
0 = Fixed Call Forwarding disabled
1 = Fixed Call Forwarding with both
extensions ringing
2 = Fixed Call Forwarding when
unanswered
3 = Fixed Call Forwarding Immediate
4 = Fixed Call Forwarding when busy or
unanswered
0
Set the type of substitute call receipt and
specify the extension number transferred
on originated telephone.