NEC Univerge SV8100 Programming Manual - page 188
Issue 11.0
UNIVERGE SV8100
2 - 146
Program 14 : Trunk, Basic Setup
04
Transmit Gain Level
for Conference and
Transfer Calls
Select the CODEC
gain type used by the
trunk when it is part of
an Unsupervised
Conference.
1~63
(-15.5dB ~
+15.5dB in 0.5dB
intervals)
32 (0dB)
05
Receive Gain Level
for Conference and
Transfer Calls
Select the CODEC
gain type used by the
trunk when it is part of
an Unsupervised
Conference.
1~63
(-15.5dB ~
+15.5dB in 0.5dB
intervals)
16 (-8dB)
06
SMDR Printout
Include/Exclude the
trunk you are
programming from the
SMDR printout. Refer
to Program 35-01 and
35-02 for SMDR
printout options.
0 = No Print Out
1 = Prints Out
0
35-01
35-02
07
Outgoing Calls
Allow/Prevent
outgoing calls on the
trunk you are
programming.
0 = Deny (No)
1 = Allow (Yes)
1
08
Toll Restriction
Enable/Disable Toll
Restriction for the
trunk. If enabled, the
trunk follows Toll
Restriction
programming
(example: Programs
21-05, 21-06). If
disabled, the trunk is
a toll free line.
0 = Restriction
Disabled (No)
1 = Restriction
Enabled (Yes)
1
21-04
21-05
21-06
09
Private Line
0 = Disable
Private Line
(Normal)
1 = Enable
Private Line
(Private Line)
0
Item
No.
Item
Input Data
Default
Related
Program