NEC Univerge SV8100 Programming Manual - page 803
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Programming Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
966
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 761
Note 1:
For IPLA, 0~270ms is valid. If set to more than 270ms, then buffer size is 270ms.
Note 2:
For IPLA, 0~160ms is valid. If set to more than 160ms, then buffer size is 160ms.
Conditions
None
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
32
RTP Filter
To avoid incorrect voice pass
connection, this Program
checks the sending side
address from received RTP
packet at VoIPDB.
0 = Disable
1 = Enable
1
33
DTMF Level Mode
Used only by IPLB.
0 = VoIPU default
value
1 = Main soft value
0
34
DTMF Level High
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
0
35
DTMF Level Low
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
0
Item
No.
Item
Input Data
Default