NEC Univerge SV8100 Programming Manual - page 275
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 233
Conditions
None
Feature Cross Reference
None
15
Caller ID Display Mode
0 = Name and Number (Both)
1 = Name
2 = Number
0
18
Dialing Record Display Time
0~64800 seconds
30
19
Virtual Extension Mode
Set the mode of a virtual extension
key that appears on a DSS console.
0 = No
1 = Yes
0
23
Phone Operation Mode
Selects the Loop Key operation like
the UX5000 terminal, or the CAP Key
operation like the SV8100 terminal.
0 = Original Operation Mode (CAP Key)
1 = UX5000 Special Operation Mode (Loop
Key)
0
26
F-Route Outgoing Mode From
Incoming Call History
Enable or Disable the ability to route
Calls in the Call History via F-Route if
the leading digit(s) are set to F-Route.
If set to 0 (Off), all Calls are routed via
Normal Trunk Routing.
If Set to 1 (On), if the leading digit(s)
are set to F-Route in PRG 11-01 or
11-20 the call will follow that F-Route
Programming.
0 = Off
1 = On
0
11-01
11-20
27
ACD Monitor for Business Mode
Select whether or not Call Monitor
provided in ACD Mode works in
normal business mode.
0 = Off
1 = On
0
Input Data (Continued)
Item
No.
Item
Input Data
Default
Related
Programming