NEC Univerge SV8100 Programming Manual - page 242
Issue 11.0
UNIVERGE SV8100
2 - 200
Program 15 : Extension, Basic Setup
Conditions
When a key is programmed using service code 752, it cannot be programmed
with a function using the 751 code until the key is undefined (000). For example
with a Park Key programmed by dialing 752 +
04 must be undefined by dialing
752 + 000 before it can be programmed as a Voice Over key by dialing 751 + 48.
When assigning a CAP key,
08, an orbit number must be used. If orbit 000 is
used, it automatically assigns the next available orbit.
Feature Cross Reference
LED Indication Reference:
ON = LED pattern 7 (On).
OFF = LED pattern 0 (Off).
Rapid Blink = LED pattern 3 (RW).
Slow Blink (General Function Level) = LED pattern 5 (IL).
Slow Blink (Appearance Function Level) = LED pattern 1 (FL).
Fast Blink = LED pattern 3 (RW).
Stutter Blink = LED pattern 4 (IR).