NEC Univerge SV8100 Programming Manual - 20-25 : Isdn Options
Issue 11.0
UNIVERGE SV8100
2 - 284
Program 20 : System Option Setup
Description
Use Program 20-25 : ISDN Options to define the ISDN system options.
Program 20 : System Option Setup
20-25 : ISDN Options
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Send the Release Message After Subscriber Hangs
Up
0 = Off
1 = On
1
02
Progress Indicate Information Element Detect
0 = Off
1 = On
1
03
Bearer Capability Select from SLT Outgoing
0 = 3.1KHz Audio
1 = Speech
0
04
Send DT until user dials first digit (Local Dial Tone)
With Overlap Sending Mode, if the network side stops
dial tone when CLI is included in the SETUP message,
the system sends dial tone until the user dials the first
digit instead of the network.
0 = Off
1 = On
0
05
T305 Timer Start After Sending Disconnect
Message
0 = Off
1 = On
1
06
Call Proceeding Send Mode
0 = Off
1 = On
1
07
Local Busy Tone Mode Set When Disconnect
Message Received
0 = Local Busy Tone Off
1 = Busy Tone from NT
(network side)
0
08
Use of Lower Layer Compatibility (LLC)
This Program must be set to 0 for International Dialing
when using Calling Number Presentation (CPN) from
station.
0 = Disable (Off)
1 = Enable (On)
0
09
High Layer Compatibility (HLC) Sending
0 = Disable (Off)
1 = Enable (On)
0
10
S-Point Terminal Seizes Analog Trunk
0 = Disable (Off)
1 = Enable (On)
1