NEC Univerge SV8100 Programming Manual - page 65
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 23
Description
Use Program 10-12 : CD-CP00-US Network Setup to setup the IP Address,
Subnet-Mask, and Default Gateway addresses.
Caution! If any IP Address or NIC setting is changed, the system must be reset
for the changes to take affect.
Program 10 : System Configuration Setup
10-12 : CD-CP00-US Network Setup
Level:
SA
Input Data
Item
No.
Item
Input Data
Default
Description
01
IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
192.168.0.10
Set for CD-CP00-US.
02
Subnet
Mask
128.0.0.0
240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.252.0.0
255.255.128.0
255.255.240.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
224.0.0.0
252.0.0.0
255.128.0.0
255.240.0.0
255.254.0.0
255.255.192.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
255.255.255.0
The setting of Subnet
Mask is invalid when
all Host Addresses
are 0.
If the network section
is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet
Mask is invalid.
03
Default
Gateway
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
IP Address for Router.