NEC Univerge SV8100 Programming Manual - page 273
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 231
Description
Use Program 20-02 : System Options for Multiline Telephones to set various
system options for multiline telephones.
Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
Related
Programming
01
Trunk Group Key Operation Mode
0 = Display
1 = No Display
1
Mode
0 = Display
1 = No
Display
Incoming:
300 IPM Red blink
Talking:
Green Light-
ing (on Talk-
ing TEL)
LED Off
Holding:
60 IPM Green
blink (on
holding TEL)
LED Off
02
Trunk Group Access Key
Operating Mode
Set the operating mode of the
extension trunk group keys. The keys
are for incoming access, outgoing
access, or both.
0 = Outgoing/Incoming
1 = Outgoing
2 = Incoming
0
04
Retrieve the Line After Transfer
Enable (1)/Disable (0) an extension
ability to answer a call after it has
been transferred, but before it is
answered.
0 = Not Holding (No Keep)
1 = Holding (Keep)
1
20-09-07
05
Headset Busy Mode
Set the conditions under which a
headset extension is busy to
incoming callers.
0 = No (Disable)
1 = Yes (Enable)
0