NEC Univerge SV8100 Programming Manual - page 598
Issue 11.0
UNIVERGE SV8100
2 - 556
Program 47 : In-Mail
11
Auto Time Stamp
Enable/Disable Auto Time Stamp for the Subscriber
Mailbox. If enabled, after the subscriber listens to a
message SV8100 InMail announces the time and
date the message was left. Auto Time Stamp also
announces the message sender (if known).
A subscriber also can enable Auto Time Stamp from
their mailbox.
0 = No (Disable)
1 = Yes (Enable)
0
12
System Administrator
Designate the Subscriber Mailbox as a System
Administrator. This allows the subscriber to use the
SA options after logging onto their mailbox.
0 = No (Disable)
1 = Yes (Enable)
Mailbox 1 (101)=1
Other mailboxes=0
13
Dialing Option
Provide additional dialing options for Next Call
Routing Mailbox calls (see Next Call Routing
Mailbox below). If enabled, a caller who accesses
the Subscriber Mailbox to leave a message can dial
any option in the Next Call Routing Mailbox Dial
Action Table. If disabled, the caller can dial only 0 (to
use the Next Call Routing Mailbox 0 action).
0 = No (Disable)
1 = Yes (Enable)
0
14
Next Call Routing Mailbox
(Next CR Mbox)
Assign a Next Call Routing Mailbox to the
Subscriber Mailbox. This provides callers with
additional dialing options while listening to a
Subscriber Mailbox recorded or default greeting.
The digits the caller can dial depends on the setting
of the Next Call Routing Mailbox and Alternate Next
Call Routing Mailbox options.
Call Routing
Mailbox Number
(1~3 digits, 01~032)
No entry (Entered
by pressing CLEAR)
1 (Call Routing
Mailbox 01)
By default, Call
Routing Mailbox
numbers are
01~08.
15
Directory List Number
0 = None
1~8 = List Number
= All
0
16
Voice Prompt Language
Refer to
1
17
Enable Paging
0 = No (Disable)
1 = Yes (Enable)
0
18
Paging Option
0 = RNA
1 = Immediately
0
19
Telephone User Interface Type
0 = Numeric
1 = Mnemonic
0
20
Enable E-mail Notification
(Not supported in Version 2500 or lower)
0 = No
1 = Yes
0
Input Data (Continued)
Item
No.
Item
Input Data
Default